We’re currently updating our product catalogue — some items may be temporarily unavailable. Thank you for your patience.
We’re currently updating our product catalogue — some items may be temporarily unavailable. Thank you for your patience.
We’re currently updating our product catalogue — some items may be temporarily unavailable. Thank you for your patience.
We’re currently updating our product catalogue — some items may be temporarily unavailable. Thank you for your patience.
OEM Grade
Factory-standard quality
Fast Dispatch
Next working day
Secure Checkout
SSL encrypted
Not sure which finish? Explore all 33 finishes or view the colour chart.
OEM Grade
Factory-standard quality
Fast Dispatch
Next working day
Secure Checkout
SSL encrypted
In Stock
Ready to ship
Ships 1–2 Days
Fast dispatch
Genuine Quality
OEM-grade finish
The Audi RS3 8P was the first ever RS3 - the car that took the humble A3 platform and shoehorned in the now-iconic 2.5 TFSI turbocharged five-cylinder and quattro grip to create a giant-killing hatch. Raw, boosty and instantly recognisable by its blistered arches and meaty stance, the 8P remains a modern-classic cult favourite. Our Audi RS3 8P Badge Pack is made to honour that original recipe.
This is a matched multi-badge set tailored to the 8P generation, pairing the front grille emblem with the rear boot badge so your car carries a consistent, factory-correct look. Each piece is shaped to sit on the original mounting points, replacing tired or faded factory badges with a crisp, drill-free swap.
Pride of place goes to Gloss Black, our best-seller and the definitive way to de-chrome an 8P - the clean, blacked-out factory finish behind every search for a black RS3 badge. The wider palette gives you total freedom:
Built from OEM-grade automotive ABS and protected by a UV-stable weatherproof coating, every badge arrives with genuine 3M VHB tape pre-applied - a true peel-and-press fit with no drilling required. Enjoy worldwide shipping, a 3-month quality guarantee and same-day dispatch on orders before 1pm Mon-Fri.
Refresh your 8P's identity and bring those badges back to showroom sharpness. We manufacture every emblem ourselves here in the UK, so custom and bespoke requests are genuinely welcome.
Order before 1pm Mon to Fri for same-day dispatch. UK tracked 1-3 working days, international tracked 5-14.
Every badge is custom-made to your exact spec, bespoke and built just for you, so we do not offer returns or exchanges on change of mind.
Fully covered against defects. Anything that arrives damaged or faulty is replaced free, just send a photo within 7 days.
1x Audi RS3 8P Badge Pack
Individually inspected, precision injection moulded, OEM-spec dimensions
Pre-applied 3M VHB tape
Automotive-grade double-sided tape — same 3M VHB used by OEMs
Isopropyl alcohol prep pad
Surface cleaner for maximum adhesion
Microfibre application cloth
Lint-free cloth for a clean, residue-free installation
Step-by-step fitting guide
Illustrated instructions for easy installation
Premium branded packaging
Sturdy box designed to protect your badge during shipping
Prepare the surface
Thoroughly clean the rear boot/tailgate mounting area using the included isopropyl alcohol prep pad. Remove any wax, polish, dirt or residue. Allow to dry completely.
Dry-fit & align
Without removing the adhesive backing, hold the badge against the vehicle to check alignment. Use the original mounting position or existing indentation marks as a guide.
Apply the badge
Peel the protective film from the pre-applied 3M VHB adhesive tape. Carefully position the badge and press firmly into place. Start from one end and press across to avoid air pockets.
Apply pressure & cure
Apply firm, even pressure across the entire badge for a minimum of 30 seconds. For optimum bond strength, avoid washing the vehicle for 24 hours and do not use a pressure washer on the badge area for 72 hours.
Tip: For best adhesion, install at temperatures above 15°C. If installing in cold weather, gently warm the mounting surface with a hair dryer before application.
Yes. Each badge is precision-cut to OEM dimensions so it directly replaces or overlays the factory emblem for a clean, exact fit, and it comes with genuine 3M VHB adhesive pre-applied for a drill-free peel-and-press install.
No. We use genuine 3M VHB automotive adhesive designed for painted surfaces. It holds securely in all weather yet removes cleanly without harming your paint or leaving residue.
This badge is made to order in 33 finishes across four tiers: Mirror Chrome, Gloss (including Gloss Black), Highlights and the flagship Galaxy range. Choose your finish when you customise, or browse them all on our finishes pages.
Yes. Gloss Black is our most popular base and the default look — a clean, factory-style blacked-out finish that suits any colour car. Prefer a reflective look? Choose Mirror Black, or any of our 33 finishes, when you customise. Available front, rear or as a pair, shipped worldwide.
Orders placed before 1pm Monday to Friday are dispatched the same day via Royal Mail, with fast UK and worldwide tracked delivery.
Our OEM-grade acrylic finishes are UV-stable and built to survive years of British weather, jet washes and motorway miles without fading, cracking or peeling, and every badge is backed by a 3-month quality guarantee.
OEM-Grade Quality
Engineered to exceed factory standards with precision construction
Express Dispatch
Orders placed before 1pm ship same day via Royal Mail
3-Month Guarantee
Quality assured with our 90-day product warranty
Secure Checkout
SSL encrypted payment processing powered by Stripe
From
£248.00Base Colour
The body colour of your badge
Accent Colour
Choose a finish tier, then pick your colour
Choose a finish tier above to see available colours
Choose your options above to continue
