Mazda MPS Badges
Customisable

Mazda MPS Badges

£35.00 – £100.00
International Tracked Shipping
Ships today— Order before 1pm UK time for same-day dispatch

Not sure which finish? Explore all 39 finishes or view the colour chart.

OEM Grade

Factory-standard quality

Fast Dispatch

Next working day

Secure Checkout

SSL encrypted

In Stock

Ready to ship

Ships 1–2 Days

Fast dispatch

Genuine Quality

OEM-grade finish

About This Product

MPS - Mazda Performance Series - is the badge the hot-Mazda crowd respects. Worn by the turbocharged Mazda3 MPS and Mazda6 MPS, it signalled a genuinely rapid, torque-rich front-driver that punched well above its understated bodywork. These were the sleeper performance Mazdas: discreet on the outside, ferocious once the turbo spooled. The MPS emblem is shorthand for that quietly mad character, and it deserves to be shown off rather than left to fade.

This is the full Mazda MPS Badge set - the matched MPS emblems to refresh your car's identity front and rear, swapping in for the originals on the standard factory points. Each one is a drill-free peel-and-press fit, overlaying or replacing the worn factory badge in minutes.

The standout seller is Gloss Black - a clean, deep lacquer that blacks out the lettering for a stealthy factory-look upgrade, and the obvious pick if you're after a black MPS badge or a fully de-chromed rear end. The complete 33-finish range across four tiers means you can match or contrast exactly:

  • Mirror Chrome - liquid-metal reflectivity
  • Gloss - solid lacquers led by the ever-popular Gloss Black
  • Highlights - neon brights for maximum contrast
  • Galaxy - deep metallic flake with real depth

Built from OEM-grade ABS, finished in a weatherproof, UV-stable coating and pre-applied with genuine 3M VHB tape, these badges shrug off British weather and resist fade. We ship worldwide, dispatch same-day on orders before 1pm Mon-Fri, and stand behind every set with a 3-month guarantee.

Restore your MPS to its proper sharp, purposeful look. We make them ourselves in-house, so custom and bespoke requests are warmly welcomed.

Worldwide shipping

Order before 1pm Mon to Fri for same-day dispatch. UK tracked 1-3 working days, international tracked 5-14.

Made to order

Every badge is custom-made to your exact spec, bespoke and built just for you, so we do not offer returns or exchanges on change of mind.

3-month guarantee

Fully covered against defects. Anything that arrives damaged or faulty is replaced free, just send a photo within 7 days.

Product Details

Specifications
Material
Premium automotive-grade construction
Finish
39 premium colour finishes
UV Protection
UV-resistant finish
Warranty
3-month quality guarantee
Variants Available
369
Dispatch
Same day (order before 1pm)
Shipping
Worldwide (Royal Mail tracked)
What’s Included

1x Mazda MPS Badges

Individually inspected, precision injection moulded, OEM-spec dimensions

Pre-applied 3M VHB tape

Automotive-grade double-sided tape — same 3M VHB used by OEMs

Isopropyl alcohol prep pad

Surface cleaner for maximum adhesion

Microfibre application cloth

Lint-free cloth for a clean, residue-free installation

Step-by-step fitting guide

Illustrated instructions for easy installation

Premium branded packaging

Sturdy box designed to protect your badge during shipping

Fitting Instructions

Rear Badge Installation

1

Prepare the surface

Thoroughly clean the rear boot/tailgate mounting area using the included isopropyl alcohol prep pad. Remove any wax, polish, dirt or residue. Allow to dry completely.

2

Dry-fit & align

Without removing the adhesive backing, hold the badge against the vehicle to check alignment. Use the original mounting position or existing indentation marks as a guide.

3

Apply the badge

Peel the protective film from the pre-applied 3M VHB adhesive tape. Carefully position the badge and press firmly into place. Start from one end and press across to avoid air pockets.

4

Apply pressure & cure

Apply firm, even pressure across the entire badge for a minimum of 30 seconds. For optimum bond strength, avoid washing the vehicle for 24 hours and do not use a pressure washer on the badge area for 72 hours.

Tip: For best adhesion, install at temperatures above 15°C. If installing in cold weather, gently warm the mounting surface with a hair dryer before application.

Frequently asked questions

Will the Mazda MPS Badges fit my car?+

Yes. Each badge is precision-cut to OEM dimensions so it directly replaces or overlays the factory emblem for a clean, exact fit, and it comes with genuine 3M VHB adhesive pre-applied for a drill-free peel-and-press install.

Will the adhesive damage my paint?+

No. We use genuine 3M VHB automotive adhesive designed for painted surfaces. It holds securely in all weather yet removes cleanly without harming your paint or leaving residue.

What colour finishes can I choose?+

This badge is made to order in 39 finishes across four tiers: Mirror Chrome, Gloss (including Gloss Black), Highlights and the flagship Galaxy range. Choose your finish when you customise, or browse them all on our finishes pages.

Are the Mazda MPS Badges available in black?+

Yes. Gloss Black is our most popular base and the default look — a clean, factory-style blacked-out finish that suits any colour car. Prefer a reflective look? Choose Mirror Black, or any of our 39 finishes, when you customise. Available front, rear or as a pair, shipped worldwide.

How quickly will it arrive?+

Orders placed before 1pm Monday to Friday are dispatched the same day via Royal Mail, with fast UK and worldwide tracked delivery.

How long does the finish last?+

Our OEM-grade acrylic finishes are UV-stable and built to survive years of British weather, jet washes and motorway miles without fading, cracking or peeling, and every badge is backed by a 3-month quality guarantee.

OEM-Grade Quality

Engineered to exceed factory standards with precision construction

Express Dispatch

Orders placed before 1pm ship same day via Royal Mail

3-Month Guarantee

Quality assured with our 90-day product warranty

Secure Checkout

SSL encrypted payment processing powered by Stripe

You May Also Like

From

£35.00