We’re currently updating our product catalogue — some items may be temporarily unavailable. Thank you for your patience.
We’re currently updating our product catalogue — some items may be temporarily unavailable. Thank you for your patience.
We’re currently updating our product catalogue — some items may be temporarily unavailable. Thank you for your patience.
We’re currently updating our product catalogue — some items may be temporarily unavailable. Thank you for your patience.
OEM Grade
Factory-standard quality
Fast Dispatch
Next working day
Secure Checkout
SSL encrypted
Not sure which finish? Explore all 33 finishes or view the colour chart.
OEM Grade
Factory-standard quality
Fast Dispatch
Next working day
Secure Checkout
SSL encrypted
In Stock
Ready to ship
Ships 1–2 Days
Fast dispatch
Genuine Quality
OEM-grade finish
The Mercedes CLA brought four-door-coupe drama to the compact range - a sleek, low-slung silhouette that made the entry into Mercedes ownership feel like a genuine event. With its frameless-feeling roofline and sharp surfacing, the CLA has always been about style, and its rear badge is the finishing touch that ties that design language together on the bootlid.
This is the Mercedes CLA Rear Badge - the boot lettering that replaces or overlays your factory emblem on its original mounting point. Fitting is genuinely effortless thanks to pre-applied 3M VHB tape: peel, line up and press. No drilling, no adhesives to mix, no risk to your paint.
The standout option is Gloss Black - a deep, solid lacquer finish that gives the CLA a clean, blacked-out, de-chromed look. It's our most popular choice and the perfect answer for anyone hunting a black CLA badge to modernise the rear. Beyond it sits our full range of 33 finishes across four tiers:
Each emblem is precision-moulded in OEM-grade automotive ABS and protected by a weatherproof, UV-stable coating that keeps it looking sharp through every season. We ship worldwide and include a 3-month quality guarantee as standard.
It's a small, smart upgrade that lifts the whole car. And since we manufacture everything ourselves, bespoke and custom requests are warmly welcome - just tell us the look you're after.
Order before 1pm Mon to Fri for same-day dispatch. UK tracked 1-3 working days, international tracked 5-14.
Every badge is custom-made to your exact spec, bespoke and built just for you, so we do not offer returns or exchanges on change of mind.
Fully covered against defects. Anything that arrives damaged or faulty is replaced free, just send a photo within 7 days.
1x Mercedes CLA Rear Badge
Individually inspected, precision injection moulded, OEM-spec dimensions
Pre-applied 3M VHB tape
Automotive-grade double-sided tape — same 3M VHB used by OEMs
Isopropyl alcohol prep pad
Surface cleaner for maximum adhesion
Microfibre application cloth
Lint-free cloth for a clean, residue-free installation
Step-by-step fitting guide
Illustrated instructions for easy installation
Premium branded packaging
Sturdy box designed to protect your badge during shipping
Prepare the surface
Thoroughly clean the rear boot/tailgate mounting area using the included isopropyl alcohol prep pad. Remove any wax, polish, dirt or residue. Allow to dry completely.
Dry-fit & align
Without removing the adhesive backing, hold the badge against the vehicle to check alignment. Use the original mounting position or existing indentation marks as a guide.
Apply the badge
Peel the protective film from the pre-applied 3M VHB adhesive tape. Carefully position the badge and press firmly into place. Start from one end and press across to avoid air pockets.
Apply pressure & cure
Apply firm, even pressure across the entire badge for a minimum of 30 seconds. For optimum bond strength, avoid washing the vehicle for 24 hours and do not use a pressure washer on the badge area for 72 hours.
Tip: For best adhesion, install at temperatures above 15°C. If installing in cold weather, gently warm the mounting surface with a hair dryer before application.
Yes. Each badge is precision-cut to OEM dimensions so it directly replaces or overlays the factory emblem for a clean, exact fit, and it comes with genuine 3M VHB adhesive pre-applied for a drill-free peel-and-press install.
No. We use genuine 3M VHB automotive adhesive designed for painted surfaces. It holds securely in all weather yet removes cleanly without harming your paint or leaving residue.
This badge is made to order in 33 finishes across four tiers: Mirror Chrome, Gloss (including Gloss Black), Highlights and the flagship Galaxy range. Choose your finish when you customise, or browse them all on our finishes pages.
Yes. Gloss Black is our most popular base and the default look — a clean, factory-style blacked-out finish that suits any colour car. Prefer a reflective look? Choose Mirror Black, or any of our 33 finishes, when you customise. Available front, rear or as a pair, shipped worldwide.
Orders placed before 1pm Monday to Friday are dispatched the same day via Royal Mail, with fast UK and worldwide tracked delivery.
Our OEM-grade acrylic finishes are UV-stable and built to survive years of British weather, jet washes and motorway miles without fading, cracking or peeling, and every badge is backed by a 3-month quality guarantee.
OEM-Grade Quality
Engineered to exceed factory standards with precision construction
Express Dispatch
Orders placed before 1pm ship same day via Royal Mail
3-Month Guarantee
Quality assured with our 90-day product warranty
Secure Checkout
SSL encrypted payment processing powered by Stripe
From
£50.00Base Colour
The body colour of your badge
Accent Colour
Choose a finish tier, then pick your colour
Choose a finish tier above to see available colours
Choose your options above to continue
