MRC Tuning Badges
1 / 3
Customisable

MRC Tuning Badges

£37.50 – £85.00
International Tracked Shipping
Ships tomorrow— Today's 1pm cutoff has passed

Not sure which finish? Explore all 39 finishes or view the colour chart.

OEM Grade

Factory-standard quality

Fast Dispatch

Next working day

Secure Checkout

SSL encrypted

In Stock

Ready to ship

Ships 1–2 Days

Fast dispatch

Genuine Quality

OEM-grade finish

About This Product

For owners running an MRC Tuning setup, the emblem is the finishing flourish that ties the build together - a quiet nod to the calibration work, the dyno hours and the hardware behind the power. These MRC Tuning Badges are premium custom aftermarket emblems inspired by that tuning culture; they are made by us and are not official MRC merchandise, but they carry the same intent: to signal a car that has been worked on with purpose and built to perform.

Supplied as a matched emblem set, they are ideal for the grille, boot, wing or engine bay - wherever you want to mark the build. The standout choice is Gloss Black, our most popular finish and a clean, factory-look blacked-out upgrade that suits stealth builds and OEM-plus looks. Beyond that sits Mirror Chrome with its reflective liquid-metal depth, plus our Galaxy metallic-flake and neon Highlights tiers - 33 finishes in total so the badge complements your existing trim rather than fighting it.

  • Moulded in OEM-grade automotive ABS for genuine durability
  • Weatherproof, UV-stable coating that resists fade and yellowing
  • Genuine 3M VHB tape pre-applied - drill-free, peel-and-press installation
  • Worldwide shipping and a 3-month quality guarantee

Order before 1pm Monday to Friday for same-day dispatch. These badges let you wear your tuning ethos with subtlety and class. Because we manufacture everything in-house, bespoke sizing, lettering and one-off finishes are no problem at all - tell us what you have in mind and we will build it.

Worldwide shipping

Order before 1pm Mon to Fri for same-day dispatch. UK tracked 1-3 working days, international tracked 5-14.

Made to order

Every badge is custom-made to your exact spec, bespoke and built just for you, so we do not offer returns or exchanges on change of mind.

3-month guarantee

Fully covered against defects. Anything that arrives damaged or faulty is replaced free, just send a photo within 7 days.

Product Details

Specifications
Material
Premium automotive-grade construction
Finish
39 premium colour finishes
UV Protection
UV-resistant finish
Warranty
3-month quality guarantee
Variants Available
369
Dispatch
Same day (order before 1pm)
Shipping
Worldwide (Royal Mail tracked)
What’s Included

1x MRC Tuning Badges

Individually inspected, precision injection moulded, OEM-spec dimensions

Pre-applied 3M VHB tape

Automotive-grade double-sided tape — same 3M VHB used by OEMs

Isopropyl alcohol prep pad

Surface cleaner for maximum adhesion

Microfibre application cloth

Lint-free cloth for a clean, residue-free installation

Step-by-step fitting guide

Illustrated instructions for easy installation

Premium branded packaging

Sturdy box designed to protect your badge during shipping

Fitting Instructions

Rear Badge Installation

1

Prepare the surface

Thoroughly clean the rear boot/tailgate mounting area using the included isopropyl alcohol prep pad. Remove any wax, polish, dirt or residue. Allow to dry completely.

2

Dry-fit & align

Without removing the adhesive backing, hold the badge against the vehicle to check alignment. Use the original mounting position or existing indentation marks as a guide.

3

Apply the badge

Peel the protective film from the pre-applied 3M VHB adhesive tape. Carefully position the badge and press firmly into place. Start from one end and press across to avoid air pockets.

4

Apply pressure & cure

Apply firm, even pressure across the entire badge for a minimum of 30 seconds. For optimum bond strength, avoid washing the vehicle for 24 hours and do not use a pressure washer on the badge area for 72 hours.

Tip: For best adhesion, install at temperatures above 15°C. If installing in cold weather, gently warm the mounting surface with a hair dryer before application.

Frequently asked questions

Are these official MRC Tuning badges?+

They are premium custom MRC Tuning emblems, hand-finished by Badge Studio to OEM-grade standard — aftermarket badges that let you fly the MRC Tuning flag on your build, rather than official MRC Tuning merchandise. MRC Tuning have run Badge Studio emblems themselves, so you are fitting the same quality their own cars have worn.

Will a MRC Tuning badge fit my Audi, VW, SEAT or Skoda?+

Yes. MRC Tuning badges are built for the VAG platform with pre-applied 3M VHB tape, so they overlay or replace your factory emblem on Audi, VW, SEAT and Skoda for a clean, drill-free fit. Pick front, rear or a pair, then your finish, at checkout.

Will the MRC Tuning Badges fit my car?+

Yes. Each badge is precision-cut to OEM dimensions so it directly replaces or overlays the factory emblem for a clean, exact fit, and it comes with genuine 3M VHB adhesive pre-applied for a drill-free peel-and-press install.

Will the adhesive damage my paint?+

No. We use genuine 3M VHB automotive adhesive designed for painted surfaces. It holds securely in all weather yet removes cleanly without harming your paint or leaving residue.

What colour finishes can I choose?+

This badge is made to order in 39 finishes across four tiers: Mirror Chrome, Gloss (including Gloss Black), Highlights and the flagship Galaxy range. Choose your finish when you customise, or browse them all on our finishes pages.

Are the MRC Tuning Badges available in black?+

Yes. Gloss Black is our most popular base and the default look — a clean, factory-style blacked-out finish that suits any colour car. Prefer a reflective look? Choose Mirror Black, or any of our 39 finishes, when you customise. Available front, rear or as a pair, shipped worldwide.

How quickly will it arrive?+

Orders placed before 1pm Monday to Friday are dispatched the same day via Royal Mail, with fast UK and worldwide tracked delivery.

How long does the finish last?+

Our OEM-grade acrylic finishes are UV-stable and built to survive years of British weather, jet washes and motorway miles without fading, cracking or peeling, and every badge is backed by a 3-month quality guarantee.

OEM-Grade Quality

Engineered to exceed factory standards with precision construction

Express Dispatch

Orders placed before 1pm ship same day via Royal Mail

3-Month Guarantee

Quality assured with our 90-day product warranty

Secure Checkout

SSL encrypted payment processing powered by Stripe

You May Also Like

From

£37.50