Audi A1 Badges
1 / 4
AudiCustomisable

Audi A1 Badges

£30.00 – £85.00
International Tracked Shipping
Ships tomorrow— Today's 1pm cutoff has passed

Not sure which finish? Explore all 39 finishes or view the colour chart.

OEM Grade

Factory-standard quality

Fast Dispatch

Next working day

Secure Checkout

SSL encrypted

In Stock

Ready to ship

Ships 1–2 Days

Fast dispatch

Genuine Quality

OEM-grade finish

About This Product

The Audi A1 is the brand's cheeky, premium supermini — the smallest car to wear the four rings, yet packed with big-car attitude, a punchy footprint and a personalisation culture all of its own. From the original 8X to the 8Y, the A1 has always been the canvas owners love to make their own, which is exactly where a sharp set of badges earns its place.

These are custom Audi A1 badges — a tailored replacement set covering the front grille four-rings and the rear tailgate emblem, finishing both ends of the car so your A1 looks deliberate and complete. They sit on the standard factory mounting points, overlaying or replacing the original emblems while keeping the precise OEM size and fit, so nothing about the swap looks aftermarket except the colour you chose.

Our most popular pick is Gloss Black — the easiest route to a clean black A1 badge and a properly blacked-out, de-chromed look that suits white, grey and the brighter A1 colours brilliantly. It's a deep solid lacquer with a genuine factory-look finish. Want to stand out instead? The reflective Mirror Chrome, metallic Galaxy flake and neon Highlights tiers headline a full 33-finish range, so your A1 emblem can be stealthy, mirror-bright or anything between.

  • Covers: front grille four-rings + rear tailgate A1 emblem set
  • OEM-grade automotive ABS with a weatherproof, UV-stable coating
  • Genuine 3M VHB tape pre-applied — drill-free peel-and-press fitment
  • 33 finishes spanning Mirror Chrome, Gloss, Highlights and Galaxy
  • Worldwide shipping with a 3-month quality guarantee

Fitting takes minutes and no tools: clean the surface, peel the backing, align on the factory location and press firmly. The pre-applied 3M VHB grips hard and holds through weather and washes, while the UV-stable coating keeps the finish looking fresh for the long haul. Order before 1pm Mon-Fri for same-day dispatch.

We manufacture every set in-house here in the UK, so the fit and finish are consistent and the quality is ours to stand behind — and because of that, custom requests are always welcome if you want a bespoke finish combination for your A1.

Worldwide shipping

Order before 1pm Mon to Fri for same-day dispatch. UK tracked 1-3 working days, international tracked 5-14.

Made to order

Every badge is custom-made to your exact spec, bespoke and built just for you, so we do not offer returns or exchanges on change of mind.

3-month guarantee

Fully covered against defects. Anything that arrives damaged or faulty is replaced free, just send a photo within 7 days.

Product Details

Specifications
Brand Compatibility
Audi
Material
Premium automotive-grade construction
Finish
39 premium colour finishes
UV Protection
UV-resistant finish
Warranty
3-month quality guarantee
Variants Available
342
Dispatch
Same day (order before 1pm)
Shipping
Worldwide (Royal Mail tracked)
What’s Included

1x Audi A1 Badges

Individually inspected, precision injection moulded, OEM-spec dimensions

Pre-applied 3M VHB tape

Automotive-grade double-sided tape — same 3M VHB used by OEMs

Isopropyl alcohol prep pad

Surface cleaner for maximum adhesion

Microfibre application cloth

Lint-free cloth for a clean, residue-free installation

Step-by-step fitting guide

Illustrated instructions for easy installation

Premium branded packaging

Sturdy box designed to protect your badge during shipping

Fitting Instructions

Rear Badge Installation

1

Prepare the surface

Thoroughly clean the rear boot/tailgate mounting area using the included isopropyl alcohol prep pad. Remove any wax, polish, dirt or residue. Allow to dry completely.

2

Dry-fit & align

Without removing the adhesive backing, hold the badge against the vehicle to check alignment. Use the original mounting position or existing indentation marks as a guide.

3

Apply the badge

Peel the protective film from the pre-applied 3M VHB adhesive tape. Carefully position the badge and press firmly into place. Start from one end and press across to avoid air pockets.

4

Apply pressure & cure

Apply firm, even pressure across the entire badge for a minimum of 30 seconds. For optimum bond strength, avoid washing the vehicle for 24 hours and do not use a pressure washer on the badge area for 72 hours.

Tip: For best adhesion, install at temperatures above 15°C. If installing in cold weather, gently warm the mounting surface with a hair dryer before application.

Frequently asked questions

Will the Audi A1 Badges fit my car?+

Yes. Each badge is precision-cut to OEM dimensions so it directly replaces or overlays the factory emblem for a clean, exact fit, and it comes with genuine 3M VHB adhesive pre-applied for a drill-free peel-and-press install.

Will the adhesive damage my paint?+

No. We use genuine 3M VHB automotive adhesive designed for painted surfaces. It holds securely in all weather yet removes cleanly without harming your paint or leaving residue.

What colour finishes can I choose?+

This badge is made to order in 39 finishes across four tiers: Mirror Chrome, Gloss (including Gloss Black), Highlights and the flagship Galaxy range. Choose your finish when you customise, or browse them all on our finishes pages.

Are the Audi A1 Badges available in black?+

Yes. Gloss Black is our most popular base and the default look — a clean, factory-style blacked-out finish that suits any colour car. Prefer a reflective look? Choose Mirror Black, or any of our 39 finishes, when you customise. Available front, rear or as a pair, shipped worldwide.

How quickly will it arrive?+

Orders placed before 1pm Monday to Friday are dispatched the same day via Royal Mail, with fast UK and worldwide tracked delivery.

How long does the finish last?+

Our OEM-grade acrylic finishes are UV-stable and built to survive years of British weather, jet washes and motorway miles without fading, cracking or peeling, and every badge is backed by a 3-month quality guarantee.

OEM-Grade Quality

Engineered to exceed factory standards with precision construction

Express Dispatch

Orders placed before 1pm ship same day via Royal Mail

3-Month Guarantee

Quality assured with our 90-day product warranty

Secure Checkout

SSL encrypted payment processing powered by Stripe

You May Also Like

From

£30.00