OEM Grade
Factory-standard quality
Fast Dispatch
Next working day
Secure Checkout
SSL encrypted
REVO Tuning Badges
Not sure which finish? Explore all 39 finishes or view the colour chart.
OEM Grade
Factory-standard quality
Fast Dispatch
Next working day
Secure Checkout
SSL encrypted
In Stock
Ready to ship
Ships 1–2 Days
Fast dispatch
Genuine Quality
OEM-grade finish
About This Product
REVO is a fixture of the VAG software scene, from ECU and DSG tunes through to the hardware that supports them. If REVO is part of your build, these REVO Tuning Badges put that name on the boot lid. To be clear, these are premium custom aftermarket emblems, hand-finished by Badge Studio. They are not official REVO merchandise.
This listing is a rear badge. The R, E and V are your base colour, on two layers, and both layers of the O take the accent colour. 3M VHB tape is pre-applied for a drill-free fit on Audi, VW, SEAT and Skoda.
Worldwide shipping
Order before 1pm Mon to Fri for same-day dispatch. UK tracked 1-3 working days, international tracked 5-14.
Made to order
Every badge is custom-made to your exact spec, bespoke and built just for you, so we do not offer returns or exchanges on change of mind.
3-month guarantee
Fully covered against defects. Anything that arrives damaged or faulty is replaced free, just send a photo within 7 days.
Product Details
1x REVO Tuning Badges
Individually inspected, precision injection moulded, OEM-spec dimensions
Pre-applied 3M VHB tape
Automotive-grade double-sided tape — same 3M VHB used by OEMs
Isopropyl alcohol prep pad
Surface cleaner for maximum adhesion
Microfibre application cloth
Lint-free cloth for a clean, residue-free installation
Step-by-step fitting guide
Illustrated instructions for easy installation
Premium branded packaging
Sturdy box designed to protect your badge during shipping
Fitting Instructions
Rear Badge Installation
Prepare the surface
Thoroughly clean the rear boot/tailgate mounting area using the included isopropyl alcohol prep pad. Remove any wax, polish, dirt or residue. Allow to dry completely.
Dry-fit & align
Without removing the adhesive backing, hold the badge against the vehicle to check alignment. Use the original mounting position or existing indentation marks as a guide.
Apply the badge
Peel the protective film from the pre-applied 3M VHB adhesive tape. Carefully position the badge and press firmly into place. Start from one end and press across to avoid air pockets.
Apply pressure & cure
Apply firm, even pressure across the entire badge for a minimum of 30 seconds. For optimum bond strength, avoid washing the vehicle for 24 hours and do not use a pressure washer on the badge area for 72 hours.
Tip: For best adhesion, install at temperatures above 15°C. If installing in cold weather, gently warm the mounting surface with a hair dryer before application.
Frequently asked questions
Are these official REVO badges?+
They are premium custom REVO emblems, hand-finished by Badge Studio to OEM-grade standard — aftermarket badges that let you fly the REVO flag on your build, rather than official REVO merchandise.
Will a REVO badge fit my Audi, VW, SEAT or Skoda?+
Yes. REVO badges are rear emblems, built for the VAG platform with pre-applied 3M VHB tape, so they overlay or replace the factory boot badge on Audi, VW, SEAT and Skoda for a clean, drill-free fit. Pick your finish at checkout.
Will the REVO Tuning Badges fit my car?+
Yes. Each badge is precision-cut to OEM dimensions so it directly replaces or overlays the factory emblem for a clean, exact fit, and it comes with genuine 3M VHB adhesive pre-applied for a drill-free peel-and-press install.
Will the adhesive damage my paint?+
No. We use genuine 3M VHB automotive adhesive designed for painted surfaces. It holds securely in all weather yet removes cleanly without harming your paint or leaving residue.
What colour finishes can I choose?+
This badge is made to order in 39 finishes across four tiers: Mirror Chrome, Gloss (including Gloss Black), Highlights and the flagship Galaxy range. Choose your finish when you customise, or browse them all on our finishes pages.
Are the REVO Tuning Badges available in black?+
Yes. Gloss Black is our most popular base and the default look — a clean, factory-style blacked-out finish that suits any colour car. Prefer a reflective look? Choose Mirror Black, or any of our 39 finishes, when you customise. Available front, rear or as a pair, shipped worldwide.
How quickly will it arrive?+
Orders placed before 1pm Monday to Friday are dispatched the same day via Royal Mail, with fast UK and worldwide tracked delivery.
How long does the finish last?+
Our OEM-grade acrylic finishes are UV-stable and built to survive years of British weather, jet washes and motorway miles without fading, cracking or peeling, and every badge is backed by a 3-month quality guarantee.
OEM-Grade Quality
Engineered to exceed factory standards with precision construction
Express Dispatch
Orders placed before 1pm ship same day via Royal Mail
3-Month Guarantee
Quality assured with our 90-day product warranty
Secure Checkout
SSL encrypted payment processing powered by Stripe
You May Also Like
From
£35.00